To wear Go Nipless silicone nipple covers correctly: clean and dry skin, peel the backing, center over the nipple, and press firmly for 30 seconds. They'll hold for 12+ hours through heat and movement.
Step-by-Step Application Guide
Perfect application takes less than 60 seconds and ensures all-day confidence:
Step 1: Prepare your skin
Wash and thoroughly dry the chest area. Remove all traces of lotion, oil, deodorant, powder, and skincare products. The adhesive bonds directly to skin - any barrier reduces hold time. If you've just showered, wait 5-10 minutes for natural skin moisture to evaporate completely.
Step 2: Remove the backing
Hold the nipple cover by its outer edges - never touch the adhesive surface with your fingers. Oils from your hands transfer to the adhesive and weaken the bond. Peel the protective backing away from the silicone.
Step 3: Position and press
Center the nipple cover directly over your nipple. Press firmly from the center outward, smoothing toward the edges. This pushes out air pockets and creates full contact between adhesive and skin.
Step 4: Seal the edges
Run your fingertips along the entire perimeter of the cover, pressing each tapered feathered edge flat against your skin. These ultra-thin edges are designed to disappear - but only if fully adhered.
Step 5: Activate with body heat
Cup your palm over the nipple cover and hold for 30 seconds. Your body heat warms the medical-grade adhesive, activating its full bonding strength. This step is critical for 12-hour hold.
Tips for All-Day Hold
Even perfectly applied nipple covers can fail if conditions work against them. Maximize your hold time with these strategies:
- Apply early - Put on nipple covers 10-15 minutes before dressing. This gives the adhesive time to warm and bond fully before fabric friction tests it.
- Skip lotions above the waist - Body lotion, sunscreen, and perfume create a slippery barrier. Apply these products after your nipple covers are in place, avoiding the covered area.
- Control perspiration - If you run hot, apply a thin layer of antiperspirant to your chest 30 minutes before application. Let it dry completely before applying covers.
- Choose the right day - Extremely humid conditions or intense physical activity can challenge any adhesive. For high-stakes events, apply fresh covers.
Removal Without Pain
Medical-grade silicone adhesive is designed to release cleanly - but technique matters:
Never pull straight off. Yanking creates unnecessary tension and can irritate skin.
Peel from one edge. Lift a corner of the nipple cover and slowly peel back toward the opposite side, keeping the angle low against your skin.
Support your skin. Use your other hand to hold the skin taut as you peel. This distributes tension and prevents pulling.
Use warmth for stubborn bonds. If the adhesive feels too strong, press a warm (not hot) damp cloth against the cover for 30 seconds. The heat softens the adhesive for painless release. A drop of coconut oil or body oil around the edges also works.
Shop Go Nipless Nipple Covers
Ready to go braless with confidence? Shop Go Nipless reusable silicone nipple covers - medical-grade silicone, 12-hour hold, free shipping on orders over .
Frequently Asked Questions
How long do nipple covers stay on?
Go Nipless silicone nipple covers hold for 12+ hours when applied to clean, dry, product-free skin using the proper technique.
Can I apply nipple covers over lotion or sunscreen?
No - oils and lotions create a barrier that prevents adhesion. Apply nipple covers to bare skin first, then apply body products around (not over) the covered area.
What if my nipple covers start peeling at the edges?
Edge lift usually means the tapered edges weren't fully pressed down during application. If this happens, gently press the edges back down. For future applications, spend extra time smoothing edges and use the body heat activation step.
Do nipple covers work if I sweat a lot?
Go Nipless medical-grade adhesive is designed to hold through normal perspiration. For heavy sweating, apply antiperspirant to the chest area 30 minutes before application and ensure skin is completely dry.
Can I reapply the same nipple covers if they come off?
Yes - if the adhesive is still tacky, you can reapply. Gently rinse with water to remove any skin oils or debris, let dry completely, and reapply. Each pair lasts 30+ uses with proper care.
Will removing nipple covers hurt?
Not with proper technique. Peel slowly from one edge while supporting your skin. If needed, warm water or a drop of oil around the edges releases the adhesive painlessly.
How do I store nipple covers between uses?
After washing and air drying, place the adhesive side back onto the original protective film and store in the included case. This protects the adhesive from dust, lint, and damage.
Building Your Application Routine: Step by Step
Confidence with nipple covers grows from having a reliable, repeatable application process. Before your first important wear, practice the application at least twice in low-stakes settings — a casual weekend day, an errand run, a relaxed evening at home. These practice wears accomplish two things: you develop muscle memory for the placement and pressure technique, and you learn how the covers feel on your specific skin throughout a typical day.
The application sequence that works best: shower and dry the application area completely, avoid applying body lotion to the nipple area (apply it everywhere else while still keeping that area clean and dry), warm the covers briefly in your palms to activate the adhesive, center carefully using a mirror, and press firmly from the center outward for 20–30 seconds. Wait five minutes before dressing. This entire process takes less than three minutes once practiced, and the confidence that comes from a perfectly placed pair of Go Nipless covers is worth every second of that preparation.
Choosing the Right Size for Your Body
Sizing is not an optional detail — it directly affects both coverage and how natural the covers look under clothing. A cover too small for your cup size will not provide complete coverage and may shift more easily. A cover that is proportionally too large for your cup size will have excess material at the edges that creates a visible outline under fitted fabrics. Go Nipless offers sizes A through DD specifically to eliminate this problem, providing an appropriately sized cover for each cup equivalent.
When in doubt between two sizes, consider the fit of your clothing: if you regularly wear fitted or thin fabrics, choosing the more accurate size is worth the effort of measuring. If you primarily wear looser or more structured fabrics, the sizing is more forgiving. The detailed sizing guide on the Go Nipless FAQ page walks through measurement and selection for each size category, making this decision straightforward even on your first purchase.
Troubleshooting Common Confidence Killers
Even with good products and good technique, occasional issues arise. The most common are: covers shifting during the day (solution: ensure skin was completely dry and oil-free at application, and allow longer bonding time before dressing); cover edges becoming visible under clothing (solution: press edges more firmly on application, or try a different fabric with more texture to diffuse transitions); and discomfort during removal (solution: slow down the peel and use your free hand to hold skin flat at the edge).
Most confidence issues with nipple covers are technique issues, not product issues — and technique improves rapidly with a few wears of experience. Go Nipless has helped over 1,000,000 customers navigate this learning curve, and the 17,253+ verified reviews at 4.4 stars reflect a community of satisfied wearers who started exactly where you are and built their confidence one wear at a time. Each pair is reusable for 30 wears at $23.95, giving you ample opportunity to develop your approach with a proven product.